Our Poles

• Round seam welded gal 100gms+ / m2 gal + -
• 4 meters long
• 1.2mm wall
• String ring on top ( hot dipped gal after welding )
• 4 feet on bottom (for install without bracket) with welds cold gal sprayed
• Mounting bracket ( hot dipped gal )
• 3 x 30mm gal tech head screws

If you have old posts that are spongy we recommend longer screws.

We offer steel powder coated hooks as an xtra and also 1.5 mm wall poles for outer rows where you have a windier environment and no way to brace against loading the poles on one side. We have had very little problem to date but they are available at a cost.

Flag Pole System

For highwire on re-usable black string, we use a flag pole system. Why lower the poles when you can lower the wire on string?

Run 7mm UV stabilised string up the flye, attach to wire on string and pull them up to the flye.

Tie off the other end to the AgBeam

To lower, simply untie and drop down.

Benefits:

• Stronger pole
• Speed of raising and lowering
• Ease of use

We have been trialing this system for one season in 5 orchards and have 100% customer satisfaction. They will now be converting larger areas.

• Round seam welded gal 100gms+ / m2 gal + -
• up to 5 meters long
• 1.5mm wall
• String ring on top ( hot dipped gal after welding )
• 4 feet on bottom (for install without bracket) with welds cold gal sprayed
• Mounting bracket ( hot dipped gal )
• 3 x 30mm gal tech head screws

Pergola Support Bracing

• 1.2mm or 1.5mm wall
• lengths and design to suit
• 100gms gal/m2 each side

All galvanised products